Cladding Melbourne Cladding repairs, replacement, and recladding for Melbourne homes

★★★★★ Rated 5/5 | Based on 30+ Happy Clients

Rotten weatherboard replacement
Exterior cladding repairs
Full house recladding
Timber, fibre cement, and modern cladding options

Request A FREE Inspection

Fill In The Form Below
Or Call Us Now On 1300 266 889

Weatherproofing

We install cladding with the right flashings, wall wrap, fixings, and clearances so your home can handle Melbourne’s wet winters and hot summers.

Street Appeal

Fresh cladding can lift a tired facade fast. We help you choose profiles and finishes that suit your home, street, and long-term plans.

Clear Advice

We inspect the wall before we quote. If a repair will do the job, we say so. If full replacement makes sense, we explain why.

Cladding Repairs and Replacement in Melbourne

Cladding protects your home from rain, wind, sun, and daily wear. It also shapes the look of the whole house. When boards start to rot, split, swell, move, or let water in, the issue often runs deeper than the surface.

Focus Build handles cladding repairs, weatherboard replacement, and full recladding across Melbourne. We look at the full wall system, not just the boards you can see. That means we check the framing, flashings, sarking, insulation, windows, doors, gutters, and ground clearances before we recommend a fix.

Good cladding work should look clean and protect the home. We build for both.

focus build weatherboard replacement melbourne

Rotten Boards

Soft, cracked, or swollen boards can let water into the wall. We remove damaged sections and check the framing before installing new cladding.

focus build modern vertical cladding melbourne

Full Recladding

Some homes need more than patch repairs. Full recladding can improve weather protection, insulation, street appeal, and long-term maintenance.

Better Finishes

We help you match the right cladding profile, material, and finish to your home, from classic weatherboards to clean modern exterior cladding.

When Should You Replace Your Cladding?

You should look at cladding replacement when the same wall keeps failing, paint keeps peeling, boards feel soft, gaps open between boards, or you see water staining inside the home. These signs can point to poor drainage, failed flashings, hidden rot, or old materials that have reached the end of their life.

Some homes only need a small cladding repair. Others need a larger section replaced so the wall can work properly again. We take a practical approach. We do not pull a home apart unless the job calls for it. We also do not cover up a problem that will come back after the next run of heavy rain.

Melbourne homes cop all sorts of weather. South-facing walls can stay damp. West-facing walls can bake in the afternoon sun. Older weatherboard homes can also have poor ventilation, tired paint systems, and old fixings. We factor these details into the plan so the finished job holds up.

focus build fibre cement cladding installation melbourne

Cladding Options for Melbourne Homes

Different homes need different cladding. A period home in Malvern may need timber weatherboards to keep its character. A modern extension in Brighton may suit fibre cement, metal cladding, or a cleaner vertical profile. A family home in Richmond may need a durable finish that can handle tight access, pets, kids, and daily knocks.

We work with timber weatherboards, fibre cement cladding, engineered timber products, sheet cladding, and selected modern exterior cladding systems. We help you compare cost, maintenance, look, lifespan, and paint requirements before you choose.

We also consider the parts behind the cladding. Wall wrap, cavity design, flashings, insulation, and fixing methods all affect the final result. The best cladding product can still fail if it gets installed poorly. We treat the hidden work with the same care as the visible finish.

Why Choose Focus Build for Cladding in Melbourne?

Focus Build grew from a carpentry background, so cladding sits close to how we started. We understand lines, levels, mitres, fixings, trims, and finishes. Small details matter on an exterior wall because everyone sees them from the street.

We also understand Melbourne renovations. Older homes can hide rot, poor framing, termite damage, and past patch jobs under the cladding. We inspect properly, explain what we find, and give you a clear plan before the job starts.

You deal with a hands-on building team that values clean sites, honest updates, and solid work. We turn up, protect the home, do the job properly, and leave the place tidy. No runaround. No guesswork.

Featured FAQ About Cladding In Melbourne

How do I know if my cladding needs repair or replacement?

You may only need a cladding repair if the damage is limited to a few boards, panels, trims, or flashings. This can happen after impact damage, small areas of rot, poor sealing around a window, or localised weather damage.

You may need cladding replacement if large sections feel soft, paint keeps failing, boards are warped, water has entered the wall, or previous repairs have failed. Full recladding may also make sense if you want to improve street appeal, reduce maintenance, or upgrade insulation while the wall is open.

A site inspection gives the clearest answer. We check the visible cladding and the likely cause of the issue before we recommend repairs or replacement.

Do you replace rotten weatherboards in Melbourne?

Yes. Focus Build replaces rotten weatherboards across Melbourne. We remove damaged boards, check the condition behind them, and install new weatherboards with the right preparation, fixings, and finish.

Rotten weatherboards often point to a water issue. Common causes include poor paint protection, failed caulking, blocked gutters, splashback from paving, poor ground clearance, and bad flashing around windows or doors. We look for the cause so the new boards do not fail the same way.

We can replace small sections, larger elevations, or full external walls depending on the age and condition of the home.

What types of cladding do you install?

We install and replace a range of exterior cladding for Melbourne homes, including timber weatherboards, fibre cement cladding, engineered timber cladding, sheet cladding, and selected modern cladding systems.

The right option depends on your home style, budget, maintenance goals, and local conditions. A classic weatherboard home may need a profile that matches the existing facade. A new extension may suit a cleaner, more modern cladding finish.

We help you compare the practical details before you decide. That includes painting, durability, fixing requirements, moisture control, and how the cladding will meet windows, doors, corners, decks, and rooflines.

Can new cladding improve insulation?

New cladding can support better insulation, but the cladding alone does not do all the work. The biggest opportunity comes when we remove old cladding and expose the wall cavity. At that point, we can assess wall wrap, insulation, gaps, air leaks, and moisture control.

If the wall design allows it, we can help improve thermal performance while recladding the home. This can make the house feel more comfortable in winter and summer, especially in older weatherboard homes.

We will always check what is suitable for your home before making recommendations. Moisture control matters. Insulation must work with the wall system, not against it.

Do I need a permit for cladding replacement in Melbourne?

Some cladding jobs may need a permit. Others may not. It depends on the scope, the building type, the cladding system, structural changes, fire requirements, heritage controls, and local council rules.

Small like-for-like repairs may be simple. Larger recladding work, changes to external materials, work on heritage homes, or cladding on more complex buildings may need extra checks. If your property sits in a heritage overlay or planning-sensitive area, council requirements may also affect the work.

We help you understand the likely approval path before work starts. For jobs that need permits or specialist advice, we point that out early so the project can move properly.

How long does cladding replacement take?

The timeline depends on the size of the wall, access, material choice, weather, damage behind the cladding, and whether painting is part of the job. A small weatherboard repair may take a short time. A full recladding project can take longer, especially if we find rot, framing issues, or failed flashings.

We give you a clearer timeframe after the site inspection. We also plan around Melbourne weather where we can, because open external walls need proper protection during the job.

Good cladding work should not be rushed. The removal, preparation, flashing, fixing, sealing, and finishing stages all affect the final result.

Can you match existing weatherboards or cladding?

Yes, in many cases we can match existing weatherboards or cladding closely. We look at board width, profile, thickness, corner details, trims, sill details, and paint finish.

Older homes can be trickier because some profiles are no longer common. In those cases, we look for the closest available match or discuss whether a larger section should be replaced so the finished wall looks consistent.

Matching matters most on visible street-facing walls. We take the time to line up boards, trims, and junctions so the repair does not look like a rough patch.

How much does cladding replacement cost in Melbourne?

Cladding replacement cost depends on the material, wall size, access, scaffolding needs, condition of the framing, painting, insulation, and the amount of detailing around windows, doors, corners, and rooflines.

A small repair will cost less than full house recladding. A simple single-storey wall will usually cost less than a high, hard-to-access elevation. Hidden rot, termite damage, or failed flashings can also change the scope once the old cladding comes off.

Focus Build provides a clear quote after inspection. We explain what is included, what may change, and where the main cost drivers sit. That helps you make a proper decision before work starts.